Linux Mint NL

Ik gebruikte tot gisteren Linux Mint 21.3 XFCE versie en dat ging goed.
Vandaag deed ik een upgrade naar Linux Mint 22.1 via een fresh install
Alles gaat goed, behalve 1 ding en dat is wel een beetje storend.
Het probleem is het volgende: af en toe wordt mijn scherm volledig zwart en na een seconde tot anderhalve seconde komt het weer tevoorschijn waar ik gebleven was.
Als vensterbeheerder gebruik ik Xfwm4+compton.
Verder heb ik dit als systeeminformatie voor jullie:

Code: Selecteer alles

System:
Kernel: 6.8.0-52-generic arch: x86_64 bits: 64 compiler: gcc v: 13.3.0 clocksource: tsc
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.41 wm: xfwm4 v: 4.18.0 with: xfce4-panel
tools: light-locker vt: 7 dm: LightDM v: 1.30.0 Distro: Linux Mint 22.1 Xia
base: Ubuntu 24.04 noble
Machine:
Type: Desktop System: Intel product: NUC7i3BNH v: J31191-313 serial: <superuser required>
Chassis: type: 3 v: 2 serial: <superuser required>
Mobo: Intel model: NUC7i3BNB v: J22859-313 serial: <superuser required>
uuid: <superuser required> UEFI: Intel v: BNKBL357.86A.0062.2018.0222.1644 date: 02/22/2018
CPU:
Info: dual core model: Intel Core i3-7100U bits: 64 type: MT MCP smt: enabled
arch: Amber/Kaby Lake note: check rev: 9 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB
Speed (MHz): avg: 2399 high: 2400 min/max: 400/2400 cores: 1: 2400 2: 2400 3: 2399 4: 2400
bogomips: 19200
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel HD Graphics 620 driver: i915 v: kernel arch: Gen-9.5 ports: active: DP-1
empty: DP-2,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:5916 class-ID: 0300
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 compositors: 1: Compton v: 1
2: xfwm4 v: 4.18.0 driver: X: loaded: modesetting unloaded: fbdev,vesa dri: iris gpu: i915
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: DP-1 model: Medion MD20436 serial: <filter> res: 1920x1080 hz: 60 dpi: 94
size: 521x293mm (20.51x11.54") diag: 598mm (23.5") modes: max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 0 drv: iris device: 1 drv: swrast gbm:
drv: iris surfaceless: drv: iris x11: drv: iris inactive: wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.2.8-1ubuntu1~24.04.1 glx-v: 1.4
direct-render: yes renderer: Mesa Intel HD Graphics 620 (KBL GT2) device-ID: 8086:5916
Audio:
Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel v: kernel bus-ID: 00:1f.3
chip-ID: 8086:9d71 class-ID: 0403
API: ALSA v: k6.8.0-52-generic status: kernel-api
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
Device-1: Intel Ethernet I219-V driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6
chip-ID: 8086:15d8 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie: speed: 2.5 GT/s lanes: 1
bus-ID: 3a:00.0 chip-ID: 8086:24fd class-ID: 0280
IF: wlp58s0 state: up mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 bus-ID: 1-8:4 chip-ID: 8087:0a2b class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.2 lmp-v: 8 sub-v: 100
hci-v: 8 rev: 100 class-ID: 7c0104
Drives:
Local Storage: total: 953.87 GiB used: 10.69 GiB (1.1%)
ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 970 PRO 1TB size: 953.87 GiB speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 1B2QEXP7 temp: 46.9 C scheme: GPT
Partition:
ID-1: / size: 199.07 GiB used: 10.66 GiB (5.4%) fs: ext4 dev: /dev/nvme0n1p6
ID-2: /boot/efi size: 95 MiB used: 33.5 MiB (35.3%) fs: vfat dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
USB:
Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 12 rev: 2.0 speed: 480 Mb/s lanes: 1
chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-3:2 info: Trust Wireless Silent Mouse type: keyboard,mouse
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA
chip-ID: 145f:021f class-ID: 0301
Hub-2: 1-4:3 info: Genesys Logic Hub ports: 4 rev: 2.0 speed: 480 Mb/s lanes: 1 power: 100mA
chip-ID: 05e3:0608 class-ID: 0900
Device-1: 1-4.2:5 info: Microsoft Wired Keyboard 600 (model 1576) type: keyboard,HID
driver: hid-generic,usbhid interfaces: 2 rev: 2.0 speed: 1.5 Mb/s lanes: 1 power: 100mA
chip-ID: 045e:07f8 class-ID: 0300
Device-2: 1-8:4 info: Intel Bluetooth wireless interface type: bluetooth driver: btusb
interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0a2b class-ID: e001
Hub-3: 2-0:1 info: super-speed hub ports: 6 rev: 3.0 speed: 5 Gb/s lanes: 1 chip-ID: 1d6b:0003
class-ID: 0900
Sensors:
System Temperatures: cpu: 65.0 C pch: 62.5 C mobo: N/A
Fan Speeds (rpm): N/A
Repos:
Packages: pm: dpkg pkgs: 1948
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
1: deb [arch=amd64] https: //dl.google.com/linux/chrome/deb/ stable main
Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
1: deb http: //packages.linuxmint.com xia main upstream import backport
2: deb http: //ftp.belnet.be/ubuntu noble main restricted universe multiverse
3: deb http: //ftp.belnet.be/ubuntu noble-updates main restricted universe multiverse
4: deb http: //ftp.belnet.be/ubuntu noble-backports main restricted universe multiverse
5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
Info:
Memory: total: 16 GiB available: 15.51 GiB used: 2.4 GiB (15.5%)
Processes: 238 Power: uptime: 31m states: freeze,mem,disk suspend: deep wakeups: 0
hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
Compilers: gcc: 13.3.0 Client: Unknown python3.12 client inxi: 3.3.34

Iemand een idee waar het probleem zich zou kunnen situeren?
Alvast bedankt voor de hulp!

Controleer de instelling bij schermbeveiliging (systeeminstellingen) en ook de energieinstellingen en pas aan waar nodig.

Schermbeveiliging staat uit. Daar kan het, denk ik, niet aan liggen.

kijk eventueel eens in de logbestanden ofwel met de terminal

Code: Selecteer alles

dmesg

Bij de Systeeminstellingen > Nachtlicht, schakel deze uit
Mogelijke oplossing???